| V-STRIKE
SPECIFICATIONS
|
| UVC
Lamp
and fixture are factory assembled and tested. They consist of a housing,
power source, lamp sockets and a UV lamp. All components are constructed
to withstand typical HVAC environments. They are UL/C-UL Listed under
category Code ABQK (Accessories, Air Duct Mounted), UL Standdards: 153,
1598 and 1995. |
| Housing
is constructed of type 16 gauge, powder-coated steel and is equipped with
"3/4" electrical knockouts on all accessible sides to facilitate
wiring to A/C power. Fixtures may be used as side (XS) or top (XT) mount
as required or as shown on the plans. Each fixture incorporates all components
into one integral assembly that maximizes service-ability. Fixtures shall
be designed to be mounted outdoors or where necessary. |
Power
Source is an electronic, high frequency, rapid-start type with
overload protection. |
| UV Lamps and Mounting: The UV Lamps(ultraviolet lamp) are mounted in a sturday and easy to handle assembly which mounts quickly ( 1/2 ) turn into a specially designed socket within the enclosure. An integral plug provides power. This provides a very sturdy mount that allows for quick lamp changes. |
| UV Lamp and Connector are integrated into one unit that includes a steel support to protect the lamp before, during and after its installation and operation. The bayonet style lamp includes a rotational mounting and locking conector knob ( with light pipe ) that accepts lamp power via a safety plug from the power source. The lamps 0 medium bi-pin type for the VS-32-T5 and VS-28-T5. The VS-15-PLL type is a bi-axial, T5 diameter twin-tube type. Both lamps have their pins isolated from the air stream. Each achieves the specified output at 500 fpm in air temperatures of 55-135° F. They produce no ozone or other secondary contamination. |
| Independent Testing: ALTRU-V systems have been independently tested to verify conformance to UL/C-UL Listed under category Code ABQK (Accessories, Air Duct Mounted), UL Standdards: 153, 1598 and 1995. |