V-MOD
SPECIFICATIONS
|
UVC
Lamp
and fixture are factory assembled and tested. They consist of a housing,
power source, lamp sockets and a UV lamp. All components are constructed
to withstand typical HVAC environments. They are UL/C-UL Listed under
category Code ABQK (Accessories, Air Duct Mounted), UL Standdards: 153,
1598 and 1995.
|
Housing
is constructed of type 304 stainless steel and is equipped with both male
and female power plugs--one type at each to facilitate simple fixture
to fixture plug in for A/C power. Fixtures may be used as built-up or
as side access. Each fixture incorporates all components into one integral
assembly that maximizes serviceability. Fixtures are designed to be mounted
anywhere in a HVAC system.
|
Power
Source is an electronic, high frequency, rapid-type with overload
protection. It's available in 120V and is designed to maximize radiance
and reliability at UL/C-UL Listed temperatures of 55 135° F. It includes
exclusive RF and EMI suppression.
|
Sockets
are medium bi-pin, single click safety, twist lock type. They
are constructed of a UV-C
resistant polycarbonate.
|
| UV
Lamps (ultraviolet lamp) is a normal-output, hot cathode, T8 diameter,
medium bi-pin type that produces UVGI of 254 nm. Each lamp produces the
specified output at 500 fpm and air temperature of 55-135° F. |
| Independent
Testing: ALTRU-V systems have been independently tested to verify
conformance to UL/C-UL Listed under category Code ABQK (Accessories, Air
Duct Mounted), UL Standdards: 153, 1598 and 1995. |
